鶹Ʒ

Request a Quote

If you prefer, individual quotation request forms are available for specific products: the ARA01, CGE05, CGE06, YRS04, YRS05, HFG01, HFG02, and CCC01

* indicates a required field

Your details

Quoting for:

Please complete the relevant section below for each of the Eurofins York products that you are interested in.

Active Receive Antenna

ARA01KIT01 consisting of:
  • ARA01 Active Receive Antenna
  • DAE01 (antenna elements)
  • CAL08 measurement results of antenna factors, 30 MHz to 1 GHz
  • Alkaline batteries
  • Case
ARA Antenna Factors:
CAL08 measurement results of antenna factors 30 MHz to 1 GHz
ARA Accessories:
Set of 2×DAE01 100 mm dipole antenna elements
Set of 2×DAE02 270 mm improved low-frequency response dipole antenna elements (30 MHz to 300 MHz optimum sensitivity)

Comb Generator Emitters

All CGE kits consist of:

  • CGE (05 or 06 comb generator emitter) reference signal source.
  • Standard test results, dependent on the type of source
  • BP01 rechargeable battery pack and charger (CGE01_100)
  • PPU01 rechargeable battery pack and power supply (CGE05, 06)
  • Manual
  • Hard case

Request a quotation for:

CGE05 Standard Kits
CGE05KIT01 including:
  • CGE05 434 MHz to 26 GHz comb generator with precision SMA connector for direct output.
  • CAL14 Conducted output power test results, 0 GHz to 26 GHz, measured using a spectrum analyser.
CGE05KIT02 including:
  • CGE05 434 MHz to 26 GHz comb generator with precision SMA connector for direct output.
  • MCN02_P Detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE05).
  • CAL14 Conducted output power test results, 0 GHz to 26 GHz, measured using a spectrum analyser.
CGE06 Standard Kits
CGE06KIT01 including:
  • CGE06 915 MHz to 40 GHz comb generator with "K" connector for direct output.
  • CAL15 Conducted output power test results, 0 GHz to 40 GHz, measured using a spectrum analyser.
CGE06KIT02 including:
  • CGE06 915 MHz to 40 GHz comb generator with "K" connector for direct output.
  • MCN02_K Detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE06).
  • CAL15 Conducted output power test results, 0 GHz to 40 GHz, measured using a spectrum analyser.
CGE Accessories:
MCN02_SMA: Detachable monocone antenna (1 GHz to 18 GHz optimum used with CGE01C).
BP01: 5V 2AHr battery pack and charger.
PPU01: 8V 2AHr battery pack and power supply.
MCN02_P: Detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE05).
MCN02_K: Detachable monocone antenna (1 GHz to 26 GHz optimum used with CGE06).
MCN05: Detachable monocone antenna (26 GHz to 40 GHz optimum used with CGE06).

York Reference Source Kits:

All York Reference Source kits consist of:

  • YRS04/YRS05 noise/comb reference source with selectable broadband noise and comb output
  • Standard test results, dependent on the YRS model
  • Manual
  • Hard case
  • 4 x "AA" Alkaline cells

Request a quotation for:

YRS04KIT01 including:
  • YRS04 1 kHz to 1 GHz noise/comb reference source
  • MON04 configurable monopole antenna (100 kHz to 1 GHz optimum)
  • CAL23 (manufacturer's test certificate showing output power from 1kHz to 1 GHz, all modes)
YRS04KIT02 including:
  • YRS04 1 kHz to 1 GHz noise/comb reference source
  • MON04 configurable monopole antenna (100 kHz to 1 GHz optimum)
  • NIA02 Multipurpose LISN / ISN adaptor
  • CAL23 (manufacturer's test certificate showing output power from 1kHz to 1 GHz, all modes)
YRS05KIT01 including:
  • YRS05 25 Hz to 6 GHz noise/comb reference source
  • MON04 configurable monopole antenna (100 kHz to 1 GHz optimum)
  • CAL24 (manufacturer's test certificate showing output power from 25 Hz to 6 GHz, all modes)
YRS05KIT02 including:
  • YRS05 25 Hz to 6 GHz noise/comb reference source
  • MON04 configurable monopole antenna (100 kHz to 1 GHz optimum)
  • MCN04 85 mm diameter monocone antenna (1 GHz to 6 GHz optimum)
  • NIA02 Multipurpose LISN / ISN adaptor
  • CAL24 (manufacturer's test certificate showing output power from 25 Hz to 6 GHz, all modes)
YRS04 Accessories:
MON04: configurable monopole antenna (100 kHz to 1 GHz optimum)
NIA02: Multipurpose LISN / ISN adaptor
YRS05 Accessories:
MON04: configurable monopole antenna (100 kHz to 1 GHz optimum)
MCN04: 85 mm diameter monocone antenna (1 GHz to 6 GHz optimum)
NIA02: Multipurpose LISN / ISN adaptor

Harmonics and Flicker Generator:

HFG01KIT01 consisting of:
  • HFG01 Harmonics and Flicker Generator
  • CAL12 Measurement results of harmonics and flicker generated using a power analyser

Harmonics and Flicker Generator 02:

HFG02KIT01 consisting of:
  • HFG02 Harmonics and Flicker Generator
  • CAL22 Measurement results of harmonics and flicker generated using a power analyser

Cable Coupling Clamp:

CCC01KIT01 Cable Coupling Clamp kit including:
  • Pair of preassembled cable injection assemblies
  • Base plate with mounting positions for 0.3 m and 0.5 m cable test lengths
  • 2.5 mm, 5 mm and 10 mm diameter cable mounting fittings
  • Additional clip-on ferrite chokes
  • Self-adhesive copper tape (signal injection conductor)
  • Hard case for injection assemblies and accessories
CCC 01 Accessories:
CMF01 Kit of user machinable blank fittings for custom cable apertures (single cable)
Special Contact us for information regarding our testing service for cables to both IEC 96-1 and EN 50289-1-6, using CCC01

Data Protection Act

Eurofins Electrical & Electronic UK Ltd may from time to time write to you with information about its products or services, and in order to do so will store the information you give us in either paper or electronic format. Should you NOT wish to receive correspondence from us please tick here

Thank you for your interest in our products.

You may wish to read our privacy and cookies statement.